Gloss Meter
Mangal Instrumentation has introduced a Mini gloss meter, used for the measurement of gloss/ brightness of paints, opaque glasses, plastics, ceramics, porcelains, paper, cloth, pigments, flours, powder etc. This instrument is also useful for measurement of brightness/whiteness of plantation white sugar and measurement of reflectance of fabrics. Mangal Gloss Meter is a compact, portable, sensitive and accurate instrument available in two models - mains operated laboratory purpose model and a handy battery operated model - for the measurement of various geometries 45°, 60°, 85° etc. The lambda corrected silicon photodiode and CIE illuminant lamp, are used in the instrument. Custom designed products to suit specific requirements can also be offered.

True RMS Fork Current Tester
Messals Overseas (India) Pvt. Ltd. offers True RMS Fork Current Tester (Model 2300R) which is manufactured by Kyoritsu Electrical Instruments Works Ltd., Japan.
Features:
l Measures AC/DC current up to 100A without opening and closing the jaws
l Gives True RMS reading for AC current
l This Pocket size handy tester is able to measure distorted waveforms using True RMS, since waveforms are being internally calculated continuously
l Hall elements are used as a sensor to detect DC current
l The "Non-contact" voltage function indicates the presence
of AC voltage by warning the user with an audible signal
l The "Zero Adjustment Button" is used to set the DC current
range to zero in one touch
l The "Data Hold Function" holds the measured value on the LCD.
l The "Auto Power-off Function" causes the instrument to automatically enter the power-off mode about 10 minutes after the last function selector switch operation
l It is fully compliant with the International Safety Standards of IEC 61010-2-032 over voltage CAT-III 300 V, pollution degree 2
l It is suitable for conductors having size up to 10mm
l It can be used in crowded connection boxes, where cables are very short and space is too limited for traditional clamp meters.

Concrete Ultrasonic Testing Equipment
CUTE 102 is a portable apparatus for Non-destructive evaluation of concrete quality by Ultrasonic Pulse Velocity (UPV) measurement method. It is used to measure the transmission time of ultrasonic pulses in the test specimen, from which the velocity can be computed. A set of UPV readings can be used for further interpretations of structural concrete. The equipment is designed to comply with the recommendations of BS 1881 (Parts 210 & 203), ASTM C 597-71 (Reapproved 1979) and IS-13311 (Part I): 1992. The instrument generates pulses of ultrasonic frequency which are coupled into the concrete specimen under test by the transmitting transducer. The receiving transducer is used to detect these pulses and to convert them back into electrical pulses. Suitable coupling media are used to minimise losses due to acoustic mismatch at the transducer-specimen interfaces. A 10MHz quartz time base ensures accurate measurement of pulse transit time (T) with a resolution of 0.1 microsecond. The path length (L) can be measued with a tape and hence the Ultrasonic Pulse Velicity (UPV) in the specimen under test can be computed as, V=L/T. The CUTE 102 is a fully portable model with facility for using 12 V.DC as well as 230 V AC supply. A liquid crystal display (LCD) provided on the front panel ensures good readability during outdoor use. The equipment is applicable for estimation of properties of concrete such as strength uniformity, crack depths, etc. For further details please
cont....

To Read Further Subscribe Your PRINT COPY Today.